BABYTREND HYBRID, Owner'S Manual

Page: 46 / 50

90 89
10.0
Operation and Adjustments
11.0
Additional Information
Use and Adjustment of Vehicle Shoulder Belt Positioner
- Insert the vehicle shoulder belt into
both sides of the Shoulder Belt Guide.
- Pull the free end of the strap down to
tighten the Shoulder Belt Guide against
the child’s shoulder and bring the
shoulder belt into the proper position.
To remove vehicle Shoulder Belt Positioner:
- From back of car seat, unthread the
Vehicle Shoulder Belt Positioner from
the loop end.
- Store the Vehicle Shoulder Belt
Positioner in pouch located on side
of Seat Base.
Owner’s Manual/
Vehicle Shoulder Belt
Positioner Storage
Pocket (under pad)
11.1 Certifications
This Car Seat conforms to all Federal Motor Vehicle Safety
Standards for use in motor vehicles and aircraft. See use
modes below:
TODDLER CAR SEAT Mode ( WITH Harness System):
This restraint IS certified for use in motor vehicles
and aircraft.
BOOSTER CAR SEAT Mode ( WITHOUT Harness System):
This restraint is NOT certified for use in aircraft.
11.2 Installation an Use on Aircraft
Only the Toddler Car Seat WITH Harness is approved for use
on aircraft. High-back and Backless Booster Car Seats can’t be
used on aircraft as there are no lap/shoulder belts available to
properly restrain a child.
When using the Toddler Car Seat on an aircraft, follow the
installation steps in “Installation - Lap Belt only WITHOUT Top
Tether” section and secure your child per “Securing Your
Child” section.