BABYTREND CS79C59A, Owner'S Manual

Page: 26 / 34

49
50
7.0
INSTALLATION
7.0
INSTALLATION
with your knee or hand on the Base while
pulling upward on each webbing end.
The webbing will automatically lock in
place. Check that there is no slack in the
webbing on both sides of the base and
that the base is tightly installed
(Fig. 49-2 and 49-3).
7. Check that nothing is on top of the base or
anything that will interfere with the proper
latching of the Safety Seat to the Base. Place
the Safety Seat onto the Base and push down
until the Safety Seat latches securely to the
Base and you hear a click. Pull upward on the
Safety Seat to check that the Safety Seat is
securely latched onto the base (Fig. 23-1).
If the Safety Seat does not securely latch
onto the Base, the Safety Seat will provide
No Protection for your child. DO NOT use
the Safety Seat with the Base if it does not
securely latch onto the Base. Please call
Baby Trend at 1-800-328-7363 for assistance.
8. To remove the base from the vehicle,
squeeze the webbing release button
on the LATCH connector to loosen
the webbing (Fig. 50-1a). Please note
that the LATCH connector can not be
released from the LATCH anchor if the
webbing is tight. Press the LATCH
Fig. 49-1
Fig. 49-2
Fig. 49-3
hook release button on each
connector to release the connector
from the anchor (Fig. 50-1b).
7.4 Setting Proper Recline
of the Safety Seat / Base
For your child’s safety, the Safety
Seat must be properly reclined
when installed in the vehicle.
The Safety Seat included two
Seat Angle indicators on the
upper portions of the each side,
to assist in achieving the proper
angle of recline for the Safety
Seat (Fig. 50-2).
Level line indicator: use with
child greater than 22 lbs. to 35
lbs. Ensure the angle indicator
line is level with the ground to
keep the child’s airway open
(Fig. 50-3).
Press to release
Use weight range as appropriate
See warning label on safety seat
Fig. 50-2
Fig. 50-3
Fig. 50-1b
Seat Angle
Indicator
CS7913A0717
35
WARNING
DEATH OR SERIOUS INJURY can occur,
Level this line with the ground for
children greater than 22lbs. (10kg)
FAILURE TO INSTALL SAFETY SEAT AT CORRECT SEAT
ANGLE CAN CAUSE
DEATH OR SERIOUS INJURY
Child Weight:
(2.2 to 15.8kg)
Child Height:
32” or less
(81.3 cm)
SEAT ANGLE
INDICATOR
Adjust foot of base to seat correct
seat angle for weight of child.
SEE INSTRUCTION MANUAL
FOR DETAILS
Level Line
Indicator
Center
Fig. 50-1a
4 to 35 lbs