BABYTREND CS79C59A, Owner'S Manual

Page: 15 / 34

27
28
5.0
Features
5.0
Features
5.6 Operation of the Carry Handle
The Carry Handle has six positions: the rebound position, forward
mid-storage position, mid-storage position, storage position and
the non-rocking position.
For vehicle use:
• The Rebound handle position is the
ONLY approved in vehicle use position.
To adjust handle position
• Depress the two buttons located on the
handle just above the connection to the Car
Seat shell to release the handle.
Toys or other objects attached to carry handle can cause
injury in a crash. Never attach toys or other objects to
handle when in vehicle.
WARNING
• Slowly rotate the handle to the
desired position. The buttons
should pop out and the handle
should automatically lock into the
new position (Fig. 28-1).
• Before lifting the Car Seat, push
on the handle to check that both
sides of the handle have locked
into the Carry position.
5.7 Attaching the Canopy
Slip the canopy fabric through the
canopy rod. Attach the canopy by
inserting the ends of the canopy
plastic stays into the female fittings
found on the inside of the handle
hub. Press firmly until the ends click
into position.
Failure to properly adjust the harness on your child
increases the risk of death or serious injury in the event
of a sharp turn, sudden stop or crash. Please follow the
instructions very closely to ensure that the harness is
properly adjusted to fit your child at all times. Your child will
grow very rapidly! Please check the fit of the harness every
time you use the Safety Seat.
WARNING
Fig. 28-1
2.
Forward Mid-Storage
1.
Rebound
3.
Carry
4.
Mid-Storage
5.
Storage
6.
Non-Rocking