51
52
7.0
INSTALLATION
7.0
INSTALLATION
1.
Safety Seat with Base:
Make sure the
vehicle is parked on level ground. Lock
the Safety Seat onto the Base and
check that the Safety Seat is level side
to side on the vehicle seat (Fig. 51-1).
Check the Seat Angle Indicator that
matches the weight of your child.
• If the Seat Angle Indicator shows the
bubble centered between the lines, the
seat is installed at the proper level of
recline for occupants 4-22 lbs.
• If the Seat Angle Indicator shows the
level line parallel with the ground, the
seat is installed at the proper level of
recline for occupants greater than 22
lbs. to 35 lbs.
Failure to properly recline the Safety Seat on the vehicle
seat increases the risk of death or serious injury. If the Safety
Seat is positioned too upright, the child’s head may drop
forward and result in breathing problems. If the Safety Seat
is too reclined, excessive force may be exerted on the child’s
shoulders and neck in a crash. The following instructions
must be carefully followed to ensure proper recline angle for
the Safety Seat.
WARNING
Fig. 51-1
Fig. 52-2
Foot
Adjustment
Lock Button
Four
Levels
Fig. 52-1
• If the Seat Angle Indicator shows the
bubble NOT centered between the
lines ,the seat is NOT installed at the
proper level of recline for occupants
4-22 lbs. If the Seat Angle Indicator
shows the level line NOT parallel
with the ground, the seat is NOT
installed at the proper level of recline
for occupants greater than 22 lbs. to
35 lbs.
• To extend the foot of the base, Pull
outward on the hand hold as shown in
(Fig. 52-1) while holding onto the base.
To retract the foot, pull outward on the
lock handle as shown in (Fig. 52-2) and
push upward on the foot. Be careful not
to pinch your finger as the foot retracts.
Check the level indicator to see if the
seat is now level.
Summary of Contents for CS79C59A
Page 34: ...65 66...
