Fitting The Straightener/Crimper Attachment
Insert both styling plate attachments into the two slots in the power
handle, to do this make sure the ridge is lined up so the attachments
can be clicked into place.
Changing The Plates
To change between the plates, close the power handle together and
simply push down the convertible button that is on the side of the
styling plate attachment.
Instruction For Use - Straightener Plates
• Ensure the hair is dry and combed through to remove any tangles.
Divide the hair into sections ready for styling and allow the appliance
to heat up.
• Place the section of hair between the plates, close to the roots.
• Hold the hair firmly between the plates and slide slowly down the
length of the hair, from root to tip.
• Allow the hair to cool before combing through.
• Repeat on each hair section.
• After use, switch off and unplug the appliance.
• Allow to cool before storing away
Instruction For Use - Crimping Plates
• Ensure the hair is dry and combed through to remove any tangles.
Divide the hair into sections ready for styling and allow the appliance
to heat up.
• Clamp a section of hair between the top and bottom plates by
pressing the styler together. Hold in place for 5-10 seconds.
• Release the appliance from the hair and re-position the plates so
that the next crimp falls in line with the first or do random sections
depending on your style.
• Always work from the roots towards the end of the hair.
• Repeat on each hair section.
• After use, switch off and unplug the appliance.
• Allow to cool before storing away
