BRUSH SLEEVE ATTACHMENT
To create shape, texture and volume:
- Use the 19mm tong with brush sleeve.
NOTE:
The brush sleeve can only be used with the 19mm tong
attachment.
Fitting The Brush Sleeve Attachment
• Ensure the 19mm tong is inserted into the appliance (Please see the
‘Fitting The Tong Attachments’ section for direction) and is completely
cool. Push the brush sleeve over the tong and the long lever until it
reaches the end of the barrel to attach.
Instructions For Use - Brush Sleeve
• Ensure the hair is dry and combed through to remove any tangles.
Divide the hair into sections ready for styling and allow the appliance
to heat up.
• Place the brush at the roots and slide downwards towards the ends
of the hair.
• To add shape, roll a section of hair around the brush and hold for
5-10 seconds. On longer styles, be careful not to overlay the hair
around the barrel as this may cause tangling.
• Allow the section of hair to cool before styling.
• Repeat on each hair section.
• After use, switch off and unplug the appliance.
• Allow to cool before storing away
STRAIGHTENER/CRIMPER ATTACHMENT
To create sleek or crimped styles:
- Use the straightener/crimped plates
NOTE:
This appliance has one set of heated styling plates, which are
reversible for crimping or straightening. Once the plate attachments are
fitted it is simple and easy to change between using the straightening
plates and crimping plates without having to remove the attachments
themselves.
