SPIRAL SLEEVE ATTACHMENT
To create ringlets and tousled curls:
- Use the 19mm tong with the spiral sleeve
NOTE:
The spiral sleeve can only be used with the 19mm tong
attachment.
Fitting The Spiral Sleeve Attachment
• Ensure the 19mm tong is inserted into the appliance (Please see the
‘Fitting The Tong Attachments’ section for direction) and is completely
cool. Push the spiral sleeve over the tong and the long lever. Once
the sleeve has reached the small lever press the spoon button and
continue to push the sleeve to the end of the barrel to attach.
Instructions For Use - Spiral Sleeve
• Ensure the hair is dry and combed through to remove any tangles.
Divide the hair into sections ready for styling and allow the appliance
to heat up.
• Pressing the lever, place the end of the hair section under the small
lever. Once hair is in place carefully let go of the lever so the hair
is held securely between lever and barrel. To avoid crimped ends,
ensure the ends are securely wound under the lever in the direction
of the desired curl.
• Twist the appliance upwards, winding the hair around the tong,
keeping the hair within the spiral guides. Wind the hair upwards,
taking care to avoid the hot surface of the barrel touching the scalp.
• Hold in place for 5-10 seconds depending on the texture and length
of your hair.
• To remove the appliance from the hair twist the appliance downwards,
unwinding the hair from around the barrel and press the lever and pull
appliance away.
• Allow the curl to cool before styling.
• Repeat on each hair section.
• After use, switch off and unplug the appliance.
• Allow to cool before storing away
