DUAL BARREL TONG ATTACHMENT
To create waves and styles with movement:
- Use both the 13mm and 16mm tongs
Fitting The Dual Barrel Tong Attachment
• Insert the 13mm size tong in the bottom slot of the appliance. On the
bottom of the attachment there is a small ridge, ensure this is facing
downwards and then push the attachment into the handle until it
clicks into place.
• Hold the handle in the closed position and insert the 16mm size tong
in the top slot of the appliance. On the top of the 16mm size tong
attachment there is a small ridge, ensure this is facing upwards and
then begin to push the attachment into the handle, whilst still holding
the handle in the closed position you will need to line up the grooves
on the attachments so that they connect with each other and click
into place.
Instructions For Use - Dual Barrel Tong
• Ensure the hair is dry and combed through to remove any tangles.
Divide the hair into sections ready for styling and allow the appliance
to heat up.
• Take a small section of hair and wind the hair around both barrels.
Take care to avoid the hot surface of the barrels.
• Hold in place for 5-10 seconds, depending on the length and texture
of the hair.
• Release the end of the hair and slowly pull the tong from the hair.
Allow the curl to cool before styling.
• Repeat on each hair section.
• After use, switch off and unplug the appliance.
• Allow to cool before storing away
