there is a small ridge, ensure this is facing upwards and then begin
to push the attachment into the handle, whilst still holding the handle
in the closed position you will need to line up the grooves on the
attachment so that they connect with the tong attachment and it clicks
into place.
NOTE:
When using the 19mm tong only insert it as one attachment, as
the spring lever is already attached to the tong.
Instructions Of Use - 13mm, 16mm And 19mm Tong Attachments
• Ensure the hair is dry and combed through to remove any tangles.
Divide the hair into sections ready for styling and allow the appliance
to heat up.
• Pressing the lever, place the appliance midway up a section of hair
and spread hair evenly between the lever and barrel.
• Once hair is in place carefully let go of the lever so the hair is held
securely between lever and barrel. Gently slide the appliance down
to the hair ends.
• Wind the hair around the barrel at a slight angle, so the hair wraps
around the barrel in a spiral motion. As you wind the hair around the
barrel, ensure the hair is distributed evenly so the entire section is
touching the barrel, try not to overlay the hair.
• Hold in place for 5-10 seconds depending on the texture and length
of your hair.
• To remove the appliance from the hair, press the lever and pull
appliance away.
• Allow the curl to cool before styling.
• Repeat on each hair section.
• After use, switch off and unplug the appliance.
• Allow to cool before storing away
