holding the appropriate rotate button. Wind the entire section of hair
around the barrel until you reach the root. Release the rotate button
and then hold the brush in the hair for a few seconds.
8) Slide the switch to the cool setting ‘*’ for a further few seconds, this
cools the hair to create longer lasting volume.
9) To release the section, move the switch back to setting ‘I’ or ‘II’
then press and hold the opposite rotation button to unwind the hair
section.
10) Repeat as necessary.
11) After use, switch off and unplug the appliance.
12) Allow to cool before storing away.
13) Place protective shield over brush head to protect the bristles.
Please see the ‘Protective Cover’ section for direction.
Helpful Hints and Tips
• To define layers and add shape to the ends of the hair, follow steps
5 - 6 and repeat through the sections.
• To get root volume and body through the top section of hair, follow
steps 7 - 9 using an upward motion.
CLEANING & MAINTENANCE
To help keep your appliance in the best possible condition follow the
steps below:
General
• Do not wrap the lead around the appliance, instead coil the lead
loosely by the side when storing away.
• Do not use the appliance at a stretch from the power point.
• Always unplug after use.
Cleaning & Maintenance
• Unplug the appliance and let it cool completely before cleaning it.
• Holding the handle of the appliance firmly pull the top of the rear filter
towards you, this will enable the rear filter to open.
