• Do not leave the appliance unattended when switched
on or plugged in.
• This unit is equipped with a safety thermostat. In the
event of overheating the appliance will either stop
automatically or run hot and cold intermittently. Should
this happen, switch the airstyler to the “0” position,
unplug and allow to cool for 10 minutes. Before use,
ensure the rear filter is clear of hair and other debris.
Plug in and switch on. If the appliance continues to
overheat discontinue use immediately, switch off and
unplug, and contact the Conair Customer Care Line
(refer to ‘UK After Sales Service’ section for further
information).
• Do not place the appliance on any heat sensitive
surface whilst in operation.
• Take care to avoid the hot surface of the appliance
coming into direct contact with the skin, in particular
the ears, eyes, face and neck.
• Always ensure that the rear air filter is kept away from
hair during use to prevent it being pulled into the fan
which may cause the appliance to overheat.
•
Take care using this appliance when wearing
jewellery, in particular necklaces and earrings, to
avoid entanglement in the rotating brush head.
• This appliance should not be used by adults whose
reduced physical, sensory or mental capabilities,
or whose lack of experience and knowledge, might
cause a hazard, unless they have been correctly
instructed to understand the safe use and hazards
involved and are adequately supervised.
• After use, do not coil the lead around the appliance
