Protective Cover
After every use, always ensure the protective cover is placed over the
brush head. This protects the bristles from damage. When placing
the protective cover over the brush head, ensure to line it up with the
grooves around the top of the airstyler so it slides easily into place.
NOTE:
The diagram on the protective cover demonstrates the direction
it should be placed on to the brush head. If placed on incorrectly it may
be difficult to remove.
INSTRUCTIONS FOR USE
• If you have long or thick hair, you may find it quicker and easier to
use a hairdryer first to rough dry your hair and remove the excess
moisture. For added volume, turn your head upside down as you dry.
• Once the hair is 80% dry, you should start to create your style using
the styler.
Maximum Volume and Body
1) Start by sectioning the hair.
2) To turn the appliance on, slide the ‘on/off’ switch to the correct heat
setting for your hair.
3) Place the brush underneath the hair section, close to the roots and
brush through the section to remove any tangles.
4) For added root lift, hold the brush in place at the root for a few
seconds.
5) Move the brush through the hair, towards the ends and as you reach
the end of the section, start to rotate the brush away from your head
by pressing and holding the appropriate rotation button.
6) As you do this, resist the rotation of the brush by pulling the brush
downwards. This will create tension through the section of hair.
IMPORTANT!
It may take several attempts to perfect this technique,
if the brush spins too quickly, simply release the rotation button and
remove from the hair.
7) For even more volume, place the brush at the end of the hair section
and allow the brush to rotate along the hair section by pressing and
