![background image](http://html1.mh-extra.com/html/baby-lock/pro-stitcher-blps3/pro-stitcher-blps3_instruction-and-reference-manual_3401441018.webp)
3.8 | Installation
Pro-Stitcher User Manual
Y-encoder circuit board replacement
Ü
IMPORTANT
: This step is required
only
if the circuit board on the Y-encoder is blue. If the Y-encoder
has a black circuit board, skip ahead to the next step.
Replace the Y-encoder circuit board with the one in the package (
see Parts List, item G
) if the circuit board
is blue and does not have a 3-pin connector attached. It is held in place with one screw and five connecting
pins.
To replace the Y-encoder
1. Unplug the stitch regulator cable from the Y-encoder.
2. Remove the screw that holds the circuit board in
place with a small Phillips screwdriver.
3. Gently pull the circuit board outward toward the front of the quilting machine (the same direction
the screw came out).
Replace this style
Y-encoder circuit board.
This style Y-encoder circuit board
does not need to be replaced.