![background image](http://html1.mh-extra.com/html/baby-lock/pro-stitcher-blps3/pro-stitcher-blps3_instruction-and-reference-manual_3401441092.webp)
Pro-Stitcher User Manual
Settings Menu | 8.5
To turn on automatic bobbin-thread pullups
• Press
Pull-Up Auto
for Pro-Stitcher to shift the quilting machine to the right a few inches after
pulling up the bobbin thread so you can grab both threads. Press
Resume
to continue quilting the
design.
NOTE
: If Pull-Up Auto is not selected, but Pull-Up On is selected, the quilting machine will take a
stitch at the start point and then disable the motors. This enables you to manually push the quilting
machine aside to pull up the bobbin thread. Press Resume for the machine to move back into
position and resume quilting.
Control the delay following a bobbin-thread pullup
The Pause Delay feature pauses the quilting machine shortly after starting into a design and after each time
a pullup is performed. This enables you to safely trim the thread tails.
• Select
Settings
,
Pause Delay
.
To set the Pause Delay
• Select
On
to turn on Pause Delay or
Off
to turn off Pause Delay.
You have the option of setting the Pause Delay in seconds (how long of a delay) or inches (how far it
stitches before pausing).
To set Pause Delay in seconds
• Select
Seconds
and then press the
Plus Sign (+)
to increase or
Minus Sign (–)
to decrease the
number of seconds for the pause. Pro-Stitcher will pause the number of seconds indicated so you
can trim thread tails and then resume stitching.
To set Pause Delay in inches
• Select
Inches
and then press
Plus Sign (+)
to increase or
Minus Sign (–)
to decrease the number of
inches Pro-Stitcher stitches before pausing. Press Resume after trimming thread tails to continue
stitching.