![background image](http://html.mh-extra.com/html/baby-lock/pearl-blqf/pearl-blqf_assembly-instructions-manual_462472006.webp)
6
Step 1: Remove Track Supports
Parts needed
2-Table Section
Tools Required
4mm Allen Wrench (Provided)
NOTE:
The track support finish could be
damaged if not protected or if placed onto a
rough surface. Handle with care.
1-1:
Place the table sections with the track
supports face down onto a protective surface.
(
Fig. 1-1
)
NOTE:
When removing the track supports,
keep them in the same position and orientation
to ensure perfect alignment when they are
replaced.
Step 1
Remove Track Supports
Fig. 1-1
1-2:
Using the 4mm Allen wrench remove the
three screws from each track support and set
the track support aside in a safe place
(
Fig. 1-2
). Leave the table sections face down
for
Step 2-1.
Fig. 1-2