![background image](http://html1.mh-extra.com/html/baby-lock/kinetic-frame/kinetic-frame_assembly-instructions-manual_3377574026.webp)
26 Baby Lock Kinetic Frame Assembly Instructions
Step 13: Pole to Frame Assembly
Parts needed
(1) frame assembly
(1) batting storage pole
(1) quilt-top pole
(1) backing pole
(1) take-up pole
13-1: Place the poles on the frame as shown in
Fig. 13-1. The poles will snap past the plastic
fingers, which are shown in Detail 8-2a.
Step 14: Rubber End Cap Assembly
Parts needed
(1) frame assembly with poles
(8) rubber end caps
14-1: Slide one (1) rubber end cap onto
the end of each bolt sticking out of the pole
ends, as shown in Fig. 14-1. If the poles
are assembled properly, there should be
approximately 3/8-inch to ½-inch of metal
threads showing beyond the ends of the pole.
Fig. 14-1
Steps 13 & 14
Pole to Frame Assembly
Rubber End Cap Assembly
Rubber End Cap
Fig. 13-1
Take-Up Pole
Backing Pole
Batting Storage Pole
Quilt-Top Pole
Idler Pole
Summary of Contents for Kinetic Frame
Page 1: ......