![background image](http://html1.mh-extra.com/html/baby-lock/kinetic-frame/kinetic-frame_assembly-instructions-manual_3377574027.webp)
Baby Lock Kinetic Frame Assembly Instructions 27
Steps 15 & 16
Bungee Clamp Assembly
Hook & Loop Tape on Pole Assemblies
Fig. 15-1
Step 16: Hook & Loop Tape on Pole
Assemblies
Parts needed
(1) frame assembly
(1) quilt top pole
(1) backing pole
(1) take-up pole
(3) hook & loop tapes QF00665
Tools Required
measuring tape or ruler (not provided)
scissors (not provided)
NOTE: Take care to stick the hook & loop
tape on straight. This step will determine how
well your quilts load in the future. Use the
Spring Coupler snap buttons as a guide when
aligning the hook & loop tape for best results.
16-1: Prepare to attach the Velcro to the quilt
top pole, backing pole, and take-up pole, by
measuring in 3-inch from each end of the pole.
Peel the backing off the hook & loop tape as
you go and apply to all three poles, starting
at the 3-inch mark and ending at the opposite
3-inch mark. Take care to stick the hook &
loop tape on straight. This step will determine
how well your quilts load in the future. Use the
spring buttons as a guide when aligning the
hook & loop tape for best results. Hint: Attach
the hook & loop tape next to the snap buttons,
not between.
Once the hook & loop tape has been adhered
from one end of the poles to the other, it can
be clipped where the poles meet at the
pole coupler.
Step 15: Bungee Clamp Assembly
Parts needed
1- Frame Assembly
4- Bungee Clamps QF09318-110
15-1: Thread the bungee clamp cord from the
inside of the frame through the bungee slot and
then pull the cord in a downward movement to
lock the bungee clamp into place. (Fig. 15-1)
15-2: Follow Step 15-1 for the remaining
three bungee clamps.
Summary of Contents for Kinetic Frame
Page 1: ......