6 Baby Lock Kinetic Frame Assembly Instructions
Parts needed
(2) table section
Tools Required
4mm Allen wrench (provided)
NOTE: The track support finish could be
damaged if not protected or if placed onto a
rough surface. Handle with care.
1-1: Place the table sections with the track
supports face down onto a protective surface.
(Fig. 1-1)
NOTE: When removing the track supports,
keep them in the same position and orientation
to ensure perfect alignment when they are
replaced.
Step 1
Remove Track Supports
Fig. 1-1
1-2: Using the 4mm Allen wrench remove
the three screws from each track support and
set the track support aside in a safe place
(Fig. 1-2). Leave the table sections face down
for Step 2-1.
Fig. 1-2
Summary of Contents for Kinetic Frame
Page 1: ......
