background image

SEWING STITCH PATTERNS

98

e

Press the “Start/Stop” button to stop the 
machine, and then press the “Reverse/
Reinforcement Stitch” button to sew 
reinforcement stitches.

Adjusting Patterns

Depending on the type and thickness of the fabric being 
sewn, the sewing speed, whether or not stabilizer 
material is used, etc., the desired result may not be 

achieved. If this occurs, press 

, and then perform 

the following adjustment using the same sewing 
conditions as those used for your project. If the pattern 

is still misaligned after making adjustments with 

 

selected, adjust each pattern separately. 

a

Press 

, and then press 

 

on P. 7 of 

the screen.

b

Attach presser foot “N”, and then sew the 
pattern. 

c

Compare the sewn pattern with the following 
illustration.

Memo

• When sewing character stitch patterns, the machine 

automatically sews reinforcement stitches at the end 
of the stitching, then stops (The machine is 
automatically set to sew reinforcement stitches at 
the beginning and end of each character.)

• After sewing is finished, trim any excess thread.

Note

When sewing some patterns, the needle will stop in 
the raised position while the fabric is fed due to the 
operation of the needle bar separation mechanism 
which is used in this machine. At such times, a clicking 
sound different from the sound generated during 
sewing will be heard. This sound is normal and is not 
the sign of a malfunction. 

Summary of Contents for Ellageo BLL





















































































































































































































Reviews: