Baby Lock Ellageo BLL, Instruction And Reference Manual

Page: 36 / 212

CHANGING THE NEEDLE
G
etting
Re
ad
y
35
1
CHANGING THE NEEDLE
■
Checking the Needle
Place the flat side of the needle on a flat surface
(such as the needle plate or a piece of glass) and
check that the gap between the needle and the flat
surface is even.
a
Even gap
b
Flat surface (bobbin cover, glass, etc.)
a
Press the “Needle Position” button to raise
the needle.
b
Press .
→
The screen changes, and all keys and operation
buttons are locked.
CAUTION
• Always press in the operation panel before changing the needle. If is not pressed and the “Start/
Stop” button or another operation button is pressed accidentally, the machine will start and injury may result.
• Use only sewing machine needles made for home use. Other needles may bend or break and may cause injury.
• Never sew with a bent needle. A bent needle will easily break and may cause injury.
Note
Never use bent or blunt needles.
a
b
Memo
Before replacing the needle, cover the hole in the
needle plate with fabric or paper to prevent the needle
from falling into the machine.