ADJUSTING THE SCREEN
A
ppe
ndi
x
187
7
c
Using the included touch pen, lightly touch
the center of each
, in order from 1 to 5.
* If the buzzer sounds one time after you press
number 5, the operation is finished, and the mark
below 1
appears in black.
If the buzzer sounds twice, the mark below 1
appears in red, and there was an error. In this case,
repeat the steps above.
d
After making the necessary touch panel
adjustment, turn the machine off, then on
again.
Note
Only use the included touch pen to touch the screen.
Do not use a mechanical pencil, screwdriver or any
other hard or sharp object. Do not apply a strong force
to the display, otherwise damage to the display may
result.
Note
If you finish the touch panel adjustment and the screen
still does not respond, or if you cannot complete the
adjustment, contact your authorized retailer.
Summary of Contents for Ellageo BLL
