SEWING AN EMBROIDERING PATTERN
142
e
Follow steps from “Setting the bobbin” on
page 27.
■
Embroidery Needle Plate Cover
Under some conditions, based on the type of fabric,
stabilizer, or thread being used, there may be some
looping in the upper thread. In this case, attach the
included embroidery needle plate cover to the
needle plate. Attach the cover by inserting the two
projections on the underside of the cover into the
notches on the needle plate as shown below.
a
Groove
b
Projections
c
Notches
To remove the embroidery needle plate cover, place
your fingernail in the groove and lift the plate out.
Sewing Embroidery Patterns
Example:
To embroider
a
Embroidery color order
a
Thread the machine with thread for the first
color, pass the thread through the hole in
embroidery foot “U”, pull out some thread to
give it some slack, and then lightly hold the
end of the thread in your left hand.
b
Lower the presser foot, and then press the
“Start/Stop” button to start embroidering.
After 5 or 6 stitches are sewn, press the
“Start/Stop” button again to stop the
machine.
Memo
If you use threads other than those listed above, the
embroidery may not sew out correctly.
Note
• Before embroidering, check that there is enough
thread in the bobbin. If you continue sewing without
enough thread in the bobbin, the thread may tangle.
• Do not leave objects in the range of motion of the
embroidery frame. The frame may strike the object
and cause a poor finish to the embroidery pattern.
• When embroidering on large garments (especially
jackets or other heavy fabrics), do not let the fabric
hang over the table. Otherwise, the embroidery unit
cannot move freely, and the pattern may not turn
out as planned.
CAUTION
• Push the embroidery needle plate cover as far as
possible to attach it. If the embroidery needle plate
cover is not securely attached, it may cause the
needle to break.
Note
Do not use the embroidery needle plate cover for any
applications other than embroidery.
a
b
c
CAUTION
• If the thread is too tight, the needle may bend or
break.
a
Summary of Contents for Ellageo BLL
