14
mechanism under running water. Only use liquid cleaning products. All cleaning products containing
dry powder or powder in suspension are not to be used!
A specific devise is integrated in the cartridge unit to adjust the flow rate. To adjust the flow rate;
1.
Undo head assembly
2.
Pull off flow adjustor
3.
On the exposed end of the housing there are 4 cut-outs for alternative flow rates.
4.
Select one for increased/reduced flow.
5.
Replace flow adjustor with window over selected cut-out.
6.
Screw head assembly into the tap body and tighten fully.
Table 5: Troubleshooting
FAULT
POSSIBLE CAUSE
CHECKS
Pilot light not igniting
Blockage of pilot
Adjustment of pressure from flame
control
Check pilot injector is not blocked
as described in servicing
instructions - pilot and flame
safeguard
Check gas pressure to pilot as
described under servicing
instruction - adjustments
Pilot light not establishing
Positioning of thermocouple
Faulty thermocouple
Faulty flame failure control valve
Check connection of the
thermocouple to the control is not
loose
Adjust positioning of thermocouple
to ensure pilot flame is hitting
thermocouple
Contact manufacturer or
authorized service agent
Contact manufacturer or
authorized service agent
Pilot established, main burner not
lighting
Faulty thermocouple
Faulty flame failure control valve
Contact manufacturer
Contact manufacturer
Telescopic laundry arm constantly
running (on water/deck cooled
stock pot table)
Warn tap washer
Change washers in tap assembly
Contact manufacturer or
authorized service agent
Wokspout constantly running
water when in 'OFF' position
Faulty 'O' ring in Wok spout
Changing of 'O' ring as per service
kit and instructions provided with
appliance
Contact manufacturer or
authorized service agent
Short/long laundry arm constantly
running (when fitted with timer
operated knee valve)
Faulty knee valve
Faulty knee valve cartridge
Changing of knee valve cartridge
Contact manufacturer or
authorized service agent
To obtain further service information concerning this appliance, please contact;
B&S Commercial Kitchens Pty Ltd
57 Plateau Road
Reservoir VIC 3073
Tel.: + 61 3 9469 4754
Fax.: + 61 3 9469 4504
