B.Pro B.PROTHERM BPT 820 E, Translation Of The Original Operating Instructions

Page: 10 / 36

B.PROTHERM stainless steel, unheated
– 6 –
Cleaning water
A danger of slipping exists if cleaning water runs out during or after cleaning.
Completely wipe up water which runs out onto the floor.
Thoroughly dry the unit after cleaning. Remove cleaning water from the floor
of the unit interior.
Hot unit parts and objects
When the unit is loaded with hot food, the unit interior can become hot.
Hot unit parts and objects in the unit can cause burns. Allow the unit to cool
off before it is cleaned.
Maintenance Castor brakes
Regularly check the effectiveness of the castor brakes.
If the effectiveness of the brakes is not sufficient, have the defective castor
replaced immediately by one of the following:

In-house, B.PRO-trained professionals

External, B.PRO-trained customer service

B.PRO Service
Repairs Authorised persons
The unit may only be repaired by the following service points:

In-house, B.PRO-trained professionals

External, B.PRO-trained customer service

B.PRO Service
The warranty will be invalidated if the unit is repaired by anyone else or without
being commissioned.
Standards and guidelines Observe the applicable standards, guidelines and safety regulations.
The operator is responsible for compliance with the applicable standards,
guidelines and safety regulations.
Product marking The unit is provided with a rating plate. The warranty is voided if the rating
plate is removed.