RFM-C2 WMBUS – GPRS/Ethernet Gateway User Manual – Manuale d’Uso v1.1
pag. 9
RFM-C2
(Top View)
(Vista superiore)
1.
Wireless M-Bus antenna SMA connector (included)
2.
Signalling LEDs
3.
Input/output circuit terminal board (from left):
RE1 – closing relay contacts
RE2 – switching relay contacts
Uin+, Uin- – auxiliary supply voltage contacts, used e.g. for connecting supply
voltage to the relays (galvanically connected to the Uin+, Uin– contacts on the
4–pin power supply connector on the bottom side)
GND – ground used with the IN1 and IN2 input circuits
IN1, IN2 – input circuits (input type according to the jumper settings)
4.
SIM holder
5.
GSM antenna SMA connector (included).
1.
Connettore SMA per antenna Wireless M-Bus (inclusa)
2.
LED notifica
3.
Morsettiera circuito Input/output (da sinistra):
RE1 - chiusura contatti relè
RE2 - commutazione contatti relè
Uin+, Uin- - contatti ausiliari di alimentazione, utilizzato ad esempio per il
collegamento della tensione aggiuntiva per i relè (galvanicamente collegati al
Uin, contatti Uin- sul connettore di alimentazione a 4 pin sul lato inferiore)
GND - terra utilizzato con i circuiti di ingresso IN1 e IN2
IN1, IN2 - circuiti di input (tipo di ingresso in base alle impostazioni dei jumper)
4.
Alloggiamento SIM
5.
Connettore SMA per antenna GSM (inclusa).