RFM-C2 WMBUS – GPRS/Ethernet Gateway User Manual – Manuale d’Uso v1.1
pag. 29
Step by step description
1.
WMBUS Devices – the WMBUS devices by B METERS, are designed to send
the radio packet every 30, 60, 90, 120 seconds (depending on the
configuration set). We recommend to set a transmission frequency of 60s or
higher, in order to maximize battery saving.
2.
Signal Repeater [RFM-RPT2] – the signal repeater RFM-RPT2 is active for 10
minutes/hour. In this time span, the radio packets are received and re-sent.
The device allows the “Single-hop” functioning mode only: “waterfall” radio
systems are not permitted.
3.
Data concentrator [RFM-C2] – The data concentrator RFM-C2 is always active
and always listening. The radio packets received are stored and later sent to
the server, using frequencies settable by using the Server Application (1h, 2h,
4h, 6h, 12h, 1d – See paragraph 5);
4.
RFM-C2 Server – the server, in order to update the reading data,
communicates with the RFM-C2 concentrator every 1h, 2h, 4h, 6h, 12h, 1d
(depending on the configuration). It is then possible to manually download the
reading file or to schedule its automatic sending via E-Mail.
5.
E-Mail sending – the E-mail containing the reading file can be sent minimum
once in a month and maximum once a day, at a scheduled time. The
configuration can be done by using the Server application (see paragraph 5);
6.
Readings decoding – once the E-Mail is received in your mailbox, the reading
file must be downloaded in the PC and decoded by using the management
software for water (Hydrolink), heating (Hydrocal) and/or heat cost allocation
(Hydroclima). From here, you will be able to save the readings in a csv/xml file.
For any further clarification, check the proper software manual.
Descrizione Passo-Passo
1.
Dispositivi WMBUS – i dispositivi radio B METERS sono progettati per inviare
un pacchetto radio ogni 30, 60, 90, 120 secondi (a seconda della
configurazione). Si consiglia di utilizzare una frequenza di trasmissione di 60s
o superiore, al fine di massimizzare il risparmio di batteria;
2.
Ripetitore segnale [RFM-RPT2] – Il ripetitore di segnale RFM-RPT2, si attiva
per 10 minuti/ora. In questa finestra di tempo, i pacchetti radio vengono
ricevuti e re-inviati. Il dispositivo permette esclusivamente il “single-hop” (salto
singolo): non è concesso dunque un sistema “a cascata”.
3.
Concentratore dati [RFM-C2] – Il concentratore dati RFM-C2, è sempre attivo
ed è sempre in ascolto. I vari pacchetti vengono memorizzati e di seguito
trasmessi al server con frequenza impostabile sull’Applicazione server (1h, 2h,
4h, 6h, 12h, 1g – vedere paragrafo 5);
4.
Server RFM-C2 – il server comunica ogni 1h, 2h, 4h, 6h, 12h, 1g (a seconda
della configurazione) col concentratore RFM-C2 per aggiornare i dati di lettura.
E’ possibile poi scaricare manualmente il file letture, oppure programmare
l’invio automatico della mail.
5.
Invio E-Mail – La mail contenente il file letture può essere inviata da un minimo
di un invio al mese fino ad un massimo di un invio al giorno, ad un orario
prestabilito. La configurazione avviene tramite Applicazione server (vedere
paragrafo 5);
6.
Decodifica Letture – una volta ricevuta la mail nella propria casella di posta, i
dati di lettura devono essere scaricati sul PC e decodificati tramite il software
di gestione acqua (Hydrolink), calore (Hydrocal) e/o ripartizione calore
(Hydroclima). Da qui sarà possibile salvare le letture in un file csv/xml. Per
ulteriori dettagli, consultare il rispettivo manuale del software.