PROJECT:
TYPE:
HP
2
& CO
2
SERIES
MR16 / ES16
Lamp and Accessory Holder Installation
SUBMITTAL DATE
7-13-16
REFERENCE
NUMBER
INS-2151-00
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
1. Turn accessory holder upside down and remove
retainer clip. Insert up to (2) accessories.
Insert any accessory lens with the smooth
side towards the lamp. If using a honeycomb
baffle, position it farthest from the lamp.
2. Pinch retainer clip tabs and line up notches with
slots on accessory holder. Fit into accessory
holder to hold accessories in place.
6. Install faceplate using 1/8” Allen wrench and
hand-tighten the faceplate screws in a star
pattern to 30 in-lbs. min.
Do not use a power tool to install screws. Do
not exceed 40 in-lbs.
Optional Accessory Holder Installation for MR16 / ES16
3. Insert accessory holder tabs into slots on
OptiLock®.