Ground
Hot
Neutral
13. Make sure UPM housing gasket is free of any dirt
or debris. Attach the faceplate by tightening the
(6) #10-24 captive screws evenly to 30 in-lbs using
a 1/8” Allen wrench.
PROJECT:
TYPE:
Installation Instructions
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
RELEASED
12-8-17
REFERENCE
NUMBER
INS-2188-00
PM3DRM TREE STRAP™
Driver Housing
11. Slide driver feet under two screws in UPM housing
and tighten screws using Phillips screwdriver.
12. Reinstall #8-32 screws on other side of driver and
tighten to secure driver to UPM housing.