![background image](http://html1.mh-extra.com/html/b-k-lighting/denali/denali_standard-installation_4436350005.webp)
LINE UP WITH THE HOLE
Fixture Re-lamping
This product is available with field replaceable components. Exclusive interchangeable OPTIKITS and modular
LED components with quick disconnects simplifies upgrades and maintenance when necessary.
1. Remove faceplate from collar using (2) #8-32
faceplate screws with a 9/64” allen wrench.
2. Remove fixture from collar.
3. Loosen three (3) #8-32 set screws with a 5/64”
allen wrench to remove cap from fixture body.
5. Remove retainer
4. Twist and pull away optic.
10. Connect new driver assembly to fixture leads. Place
connections inside body cavity, then slide down
fixture body along guides.
6. Disconnect driver assembly from fixture body.
7. Separate heatsink from driver assembly via quick
disconnect.
8. Remove protective plastic from the double-sided
tape square on clean top of driver assembly.
9. Reconnect heatsink assembly to driver assembly
via quick disconnect. Quick disconnect tucks into
space underneath heatsink. Press heatsink down
along guides until flush and even with tape on
driver.
11. Reinstall Retainer
Standard Installation
DENALI
UPLIGHT - INTEGRAL
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
RELEASE DATE
06/26/2023
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
REFERENCE NUMBER
INS-2826-00