40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
RELEASED
3-4-18
REFERENCE NUMBER
INS-2409-00
Wireless Bluetooth® Controls with Inspiration Application
DENALI SERIES™
Inspiration Control System
WIRING DIAGRAM - Wireless Bluetooth® Controls
with Inspiration Application on iOS device
LINE
MODULE
COM
Remote
Driver
Red
Black
iOS
Bluetooth®
GROUND
iOS device must be within 5ft of fixture for
wireless operation.
iOS device controls dimming, CCT, Saturation,
and Hue using Bluetooth® wireless controls and
the application.
iOS device (iPad, iPod, iPhone) with installed
B-K Lighting Inspiration application is
required.
iOS device (Not Included) with installed B-K Lighting Inspiration Application required for use.
LINE
MODULE
COM
GROUND
Remote
Driver
10V
0V
0-10V DIM -
0-10V DIM +
Red
Black
0-10V CCT +
0-10V CCT -
Dimming
Continuous
CCT
10V
0V
iOS
Bluetooth®
WIRING DIAGRAM - Hybrid
Secondary wiring from remote driver connects
to fixture leads. 0-10V dimming connects to
module. 0-10V Continuous CCT connects to
module. iOS device controls CCT, Saturation, and
Hue.
LINE
MODULE
COM
GROUND
Remote
Driver
10V
0V
0-10V DIM -
0-10V DIM +
Red
Black
0-10V CCT DIM +
0-10V CCT DIM -
Dimming
Continuous
CCT
10V
0V
WIRING DIAGRAM - 0-10V Wired
Secondary wiring from remote driver connects
to fixture leads. 0-10V dimming connects to
module. 0-10V Continuous CCT connects to
module and controls CCT, Saturation, and Hue.
iOS device must be within 5ft of fixture for
wireless operation.
iOS device (iPad, iPod, iPhone) with installed
B-K Lighting Inspiration application is
required.
iOS device must be within 5ft of fixture for
wireless operation.
iOS device (iPad, iPod, iPhone) with installed
B-K Lighting Inspiration application is
required.
1. Mount fixture onto suitable enclosure according
to designed lighting plan.
2. Secure ½” NPS stem to mounting option. Secure
with provided locknut if applicable.
3. Pull remote wiring and external controls
through mounting plate. Make connections
from remote driver to fixture leads using
waterproof wire connectors (By Others).
See
wiring diagram.
Number of wires and connections varies with
wiring as per lighting plan.
