IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
RELEASE DATE
06/10/2023
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
REFERENCE NUMBER
INS-2406-00
Standard Installation
CO2
INTEGRAL - LED
11. Install faceplate using a 1/8” allen wrench and
hand-tighten the faceplate screws in a star pattern
to 30 in-lbs. min.
Do not use a power tool to install screws. Do not
exceed 40 in-lbs.
9. To aim OptiLock vertically: loosen two (2) 1/4-20
screws using a 3/16” allen wrench. Tilt swivel arm
with LED and optic in desired aiming direction.
Tighten two (2) 1/4-20 screws with a 3/16” allen
wrench to secure position.
10. Remove any dirt or debris in o-ring groove near top
of housing. Place o-ring inside of groove.
Failure to remove debris from groove will cause
fixture to fail and void product warranty.
