IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
RELEASE DATE
06/10/2023
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
REFERENCE NUMBER
INS-2406-00
Standard Installation
CO2
INTEGRAL - LED
Installation
3. Make connections using waterproof wire nuts
(included) to leads on the bottom of Patented
HydroLock Barrier Plate Assembly.
See wiring
diagram.
HOT (BLACK)
NEUTRAL (WHITE)
HydroLock
Plate
GROUND (GREEN)
WIRING DIAGRAM
- Non-Dimming
- INC Dimming
- ELV Dimming
All line voltage connections must be made in
compliance with the National Electrical Code.
Failure to do so will void warranty.
4. Wipe inside of housing where HydroLock plate
will sit clean of debris before inserting patented
HydroLock plate on to junction box. Align HydroLock
plate with pins in housing and seat it firmly in place.
5. Turn HydroLock
Barrier Plate clockwise ¼” to lock.
Patented
HydroLock Barrier Plate must be
completely seated to ensure proper seal or
water may intrude. This step must be done as
stated or you will void your warranty.
HydroLock
Plate
HOT (BLACK)
NEUTRAL (WHITE)
GROUND (GREEN)
0-10V + (VIOLET)
0-10V - (GRAY)
WIRING DIAGRAM
- 0-10V Dimming
All line voltage connections must be made in
compliance with the National Electrical Code.
Failure to do so will void warranty.
6. Attach OptiLock assembly to installed hydrolock
with quick disconnect. Place OptiLock
assembly in
housing, resting the OptiLock on the pins provided
inside the housing.
8. To aim OptiLock horizontally: lift OptiLock
from
resting position, and rotate to desired angle. Set
down on pins provided in housing.
7. CO2 Accy Holder Installation/Removal
For Optional Accessory Holder: Loosen the
thumbscrew and then tilt the Accessory Holder
up off the reflector so the second screw can clear
the edge of the reflector.
1. Remove temporary cover.
2. Pull primary branch circuit to installed housings.
B
-K
LIGHTIN
G
B
-K
L
IG
HT
IN
G
AIM
AR
RO
W
T
O
W
A
R
D
S
S
U
R
FA
CE
T
O
BE
LI
GH
TE
D.
DO NO
T R
EM
OV
E
TE
M
PO
R
A
R
Y
C
O
V
E
R
U
N
TI
L
H
O
U
SI
N
G
IS
A
LIG
NE
D!
FA
ILURE
TO
ALIGN HOUSING PROPER
LY
WILL
RESU
LT
IN
FA
CEPL
ATE
MISALIGNMENT
!
IMPORTANT!
Read Product Installation
Instructions Before Install.
Scan for
Soil Prep.
Guide.
