B.E.G. LUXOMAT LK-IP/KNXs REG Operating Manual Download Page 35

Page: 35 / 39

LK-IP/KNXs

REG

Operating Manual

LK-IP/KNXs REG

90403

Service and support

9.1

Manufacturer's warranty

The company B.E.G. Brück Electronic GmbH grants a warranty in accordance with the warranty

conditions, which you can download from the website at https://www.beg-luxomat.com/service/

downloads/ .

9.1.1

Product code

The product is provided with a product code that enables the product to be traced in the event of a

warranty/complaint.
The product code of the LK-IP/KNXs REG is labelled on the back of the housing.

9.2

Contact details

Service hotline:

+49 (0)2266 90121-0
Monday to Thursday 8.00 to 16.00 (UTC+1)

Friday 8.00 to 15.00 (UTC+1)

E-mail:

[email protected]

Return address for repairs:

Contact your B.E.G. subsidiary or representative.
The contact details can be found at https://www.beg-luxomat.com/en-in/service/service-points/.

Or contact us directly at

B.E.G. Brück Electronic GmbH
Gerberstrasse 33
51789 Lindlar
GERMANY

Product Code

Summary of Contents for LUXOMAT LK-IP/KNXs REG








































Search results

Summary of Contents for LUXOMAT LK-IP/KNXs REG

Reviews:

Related manuals for LUXOMAT LK-IP/KNXs REG

Brands by name

Popular brands

B.E.G. LUXOMAT LK-IP/KNXs REG, Operating Manual

Search results

Summary of Contents for LUXOMAT LK-IP/KNXs REG

Reviews:

Related manuals for LUXOMAT LK-IP/KNXs REG

Brands by name

Popular brands