Operating Manual
LK-IP/KNXs REG
90403
18
Like all programmable KNX devices the LK-IP/KNXs REG has an individual address which can be
used to access the device. This is used, for example, of the ETS when downloading to the KNX IP
router via the bus.
For the interface function the device contains additional individual addresses that can be set in the
ETS. When a client (e.g. ETS) sends telegrams to the bus via the KNX IP router, these contain one of
the additional addresses as the sender address. Each address is assigned to a connection. This
means that response telegrams can be uniquely forwarded to the respective client.
The additional individual addresses must be selected from the address range of the bus line in which
the router is installed and may not be used by another device.
The individual KNX device address and the individual addresses for additional tunneling connections
can be changed within the ETS project after the device has been added to the project.
