6.
If optional Filter
Sleeve was purchased,
slide it over Pleated
Fibrous Filter and
secure at bottom of
filter with provided
elastic.
7.
Place the larger white Gasket
over the threaded end of the
Multi-Media Cartridge.
8.
Thread the
Multi-Media
Cartridge into
the bottom of
the Filter
Connector.
Seat cartridge
firmly against
Gasket and
Gasket
firmly against
Filter Connecter
to create a snug fit.
DO NOT OVER TIGHTEN.
9.
Place the assembly
onto the Purified Water
Container to prepare
for operation and to
prevent any debris
from contaminating
the purified water.
1.
Insert the spigot threads through one
Gasket and through the spigot hole in the
lower portion of the Purified
Water Container. Slide the
second spigot Gasket over
the bolt then screw on the nut
and tighten securely.
2.
Insert the threaded end of
the Filter Connecter through
the hole in the center of the
lid.
3.
Place Source Water
Container on the lid with the
threaded end of the Filter
Connector projecting through
the hole in the bottom of the
container.
4.
Place the smallest of
the white Gaskets over the
threaded end of the Filter
Connecter.
5.
Thread the Pleated Fibrous
Filter Cartridge onto the threaded
end of the Filter Connector in
the Source Water Container.
Hand tighten until the end of
the filter seats firmly against
the Gasket and the Gasket
against the bottom of the
container.
A S S E M B LY
WP-1924
Pour-Through Water Purification and Filtration System
3
Assembling your new system is a simple process. Follow the detailed instructions and you will be
enjoying clear, great-tasting water in a matter of minutes!
Begin the assembly by washing your hands with soap and water. Next
remove the (blue) sanitary plugs from the lower spigot hole in the bucket
and from the bucket lid. These plugs may be saved for use when unit
is stored.
Always wash hands thoroughly
with soap and water before
handling system components.
Before using system wash the Filtered Water Container
to ensure removal of any contaminants introduced while
being handled or stored.
