A
ppe
n
d
ix
85
After inserting new batteries, all elements are initially shown
on the display. After a few seconds, an internal test of the
electronics is performed. The numbers shown only represent
the internal electronic tests. You will be automatically moved
to the settings (
SEt
). Correct the time setting and date from
there.
Further information on device settings can be found starting
on page 52.
NOTE
Without correctly setting the date, the correct values for the
average blood glucose level and the results in the memory
will not be displayed correctly. It is strongly recommended to
set the meter before use and to check the time after inser-
ting a new battery. A blood glucose test is not possible when
the settings mode is activated.
Summary of Contents for Omnitest 5
