MVP3 ATX
SYSTEM BOARD
AWARD BIOS SETUP
4-44
To run the auto detection program is extremely easy. Move the selection bar to “IDE
HDD AUTO DETECTION” and then press “Enter”, the system BIOS take over the job
and try to detect the type of IDE hard disk. If it succeeds, you will see a list of hard disk
with its related parameters. You may press on the “Y” key (or select one of the hard
disk type listed on the screen ). The system BIOS will transfer the parameters to the
corresponding fields in the STANDARD CMOS SETUP menu and you have completed
the IDE hard disk setup.
4.13
SAVE &EXIT SETUP
This option will save all setup values to CMOS RAM & EXIT SETUP routine, by
moving the selection bar to “SAVE & EXIT SETUP” and pressing “Enter” key, then
types “Y” and “Enter” key, the values will be saved and all the information will be
stored in the CMOS memory, and then the setup program will be terminated and the
system will start to reboot.
4.14
EXIT WITHOUT SAVING
This item exit the setup routine without saving any changed values to CMOS RAM,
When you do not want to save your change to the CMOS memory, you may choose to
run this option and the setting what you made in the BIOS setup routine will be given
away.
Move the selection bar to “EXIT WITHOUT SAVING” and click on the “Enter” key,
then you will be asked to confirm the action to exit, press the “Y” and “Enter” key, the
setup program will be terminated and the system will start to reboot.
