MVP3 ATX
SYSTEM BOARD
AWARD BIOS SETUP
3-2
3.2
HARDWARE CONFIGURATION
Before the system board is ready for operating, the hardware must be configured to
make sure it will work properly with different environment. To configure the system
board is a simple task, only a few jumpers, connectors, cables and sockets needs to be
selected and installed.
3.2.1
CONNECTORS
A connector is two or more pins that are used make connections to the system standard
accessories (such as power, mouse, printer,...etc.). The following is a list of connectors
on board, as well as descriptions of each individual connector.
(A) BAT1 Non-rechargeable battery
(Use 3V Lithium battery : CR2032)
PC
I4
PC
I 3
PC
I 2
PC
I 1
AGP
SYS. BIOS
CN4
CN5
USB
CN1
CN2
CN6
DIMM 3
DIMM 2
DIMM 1
CN8 ATX PWR.
CN9 FDC.
CN13 IDE 1
CN12 IDE 2
So
ck
et
7
CPU
SL
1
SL
2
SL
3
BAT1: Battery Socket
Pin#
Pin name
Pin#
Pin name
+
Battery Positive
-
Ground
