MVP3 ATX
SYSTEM BOARD
AWARD BIOS SETUP
3-26
2.Align the CPU and socket pin 1 corners. Match the processor corner containing the
blunt edge and the white dot to the socket corner with the distinctive pin arrangement.
The pins on the bottom should have aligned with the inner 3 rings of holes in the
socket, Place the CPU into the socket and it will goes into the socket easily. If it won’t,
pull the level up a little more and try again.
mark Pin 1
Align CPU
& insert it
3.Press the lever down. The plate will slide forward. You will feel some resistance as
the pressure starts to secure the CPU in the socket. When the CPU is installed, the lever
will snap into place at the side of the socket.
Pull lever
down.
