MVP3 ATX
SYSTEM BOARD
AWARD BIOS SETUP
4-37
The memory modules inserted onto the memory subsystem will be detected by the
system BIOS automatically. For example, when you insert a SDRAM module onto
the DIMM sockets, “SDRAM 10ns” will be displayed on the screen shown above.
(It will be “FP/EDO 70ns” when SDRAM module is absent on the DIMM
subsystem.) There are two optimum values suggested for the chipset and CPU
registers. You may select either 60ns or 70ns for EDO modules. Basically, “60 ns”
will let you have better performance. However, “70ns” is recommended in most
case causes it works with most EDO DRAM modules, As for SDRAM modules,
“10ns” is suggested for most modules. “8ns” will let you have begtter performance,
but it may cause system unstable when SDRAM modules are not fast enough.
