Azure c150, c200, c300, c400, c500, c600 User Manual Download Page 4

Azure™ cSeries User Manual

Page 3

Caution
Azure Biosystems c500 and c600 systems contain a defeatable safety interlock system. It is not 

recommend or advised by Azure Biosystems, under any circumstances, for users to defeat the interlock 

system and perform laser imaging, or imaging with any c500 or c600 light source with the access door 

open. The access door must be fully closed.

For Research Use Only

This instrument is suitable for research use only. It must be used, therefore, only by personnel who know 

the health risks associated with the reagents that are normally used with this instrument.

Warranty

The Azure cSeries products are warranted against defects in materials and workmanship for one year 

unless otherwise outlined on your sales order or 

www.azurebiosystems.com/warranty

. If any defect 

occurs in the instrument during this warranty period, Azure Biosystems, Inc. will repair or replace the 

defective parts at its discretion without charge. The following defects, however, are specifically excluded:
 

•   Defects caused by improper operation.

 

•     Repair or modification done by anyone other than Azure Biosystems or the company’s 

authorized agent.

 

•   Use of spare parts supplied by anyone other than Azure Biosystems.

 

•   Damage caused by accident or misuse.

 

•   Damage caused by disaster.

 

•   Corrosion caused by improper solvents or samples.

Voltage Setting Information

The Azure cSeries imaging system has a power supply that automatically chooses the correct voltage 

for your country or region.

CE Conformity

The following Azure™ Imaging Systems, models: c150, c200, c300, c400, c500, c600 are in conformity 

with the provisions of the following EC Directives, including all amendments, and national legislation 

implementing these directives:
 

•   Low Voltage Directive 2006/95/EC 

 

•   EMC Directive 2004/108/EC

And that the following harmonized standards have been applied:
 

•   EN61010-1: 2001

 

•   EN61326-1: 1997+A1:1998+A2:2001+A3:2003 Class A

 

•   EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11

Protection category: IP20 according IEC 60529

Contact

Azure Biosystems, Inc.

6773 Sierra Court, Unit B • Dublin, CA 94568 • USA

[email protected] • (925) 307-7127 • Fax (925) 307-7287

Summary of Contents for c150, c200, c300, c400, c500, c600




















Reviews: