User Manual
Page 30 of 40
Home
The Home menu provides a list of all the possible tasks you can perform in the
HomePlug AV Utility.
To start a task:
1.
Select the network card connected to your HomePlug AV/AV2 device.
This is
most helpful when you have more than one network card in your computer.
When you select a network card, the MAC Address of the HomePlug AV/AV2
connected to your computer appears. If there is no HomePlug AV/AV2
connected to your computer, no MAC address will appear.
2.
Select
a task.
there are four possible tasks you can perform as seen below:
Change the Private Network Name
Change the QoS settings
View devices in the network
Upgrade the firmware
When you select any of the tasks available, you will be forwarded to the
respective tab of the selected task you have chosen.
