User Manual
Page 26 of 40
Setup the HomePlugAV2s
For Twin Pack
HomePlugAV2s from a Twin Pack are preconfigured to have a common Private
Network Name unique for that pair. All you have to do is connect the
HomePlugAV2s to an Ethernet device and then plug it to a wall socket.
To setup a pair of HomePlugAV2s:
1.
Plug one end of the Ethernet cable to your Ethernet device and then
connect the other end to HomePlugAV2.
2.
Connect the HomePlugAV2 to a wall socket.
3.
Plug one end of the Ethernet cable to your other Ethernet device and then
connect the other end to HomePlugAV2.
4.
Connect the HomePlugAV2 to a wall socket.
For Single Pack
A HomePlugAV2 from a single pack uses a random Private Network Name that
prevents it from communicating with other HomePlugAV2s. To add it into an existing
network, you need to use either the Simple Connect button or the HomePlugAV2
Utility software to change the random Private Network Name to the Private Network
Name being used by the existing HomePlugAV2 network.
To add a HomePlugAV2 to an existing network:
1.
Plug one end of the Ethernet cable to your Ethernet device and then
connect the other end to your new HomePlugAV2.
2.
Connect the HomePlugAV2 to a wall socket.
3.
Add the new HomePlugAV2 by using either Simple Connect or the
HomePlugAV2 Utility software. To use Simple Connect, please refer to
Joining
an Existing HomePlugAV2 Network
. To use HomePlugAV2 Utility, please refer to
Private Network Name
.