User Manual
Page 12 of 40
Pairing your Device
Your HomePlugAV2 devices by default are preconfigured with a common Private
Network Name. Setting up your HomePlugAV2 network can quickly be done without
any hassle or complexity.
NOTE : It is advisable that you plug in your HomePlugAV2 devices side by side to
easily observe the LED behaviors of each HomePlugAV2 device. Wait until the Power
and Powerline Activity LED of both devices turns ON to confirm that the connection
has successfully been established
1.
In ROOM A plug in your HomePlugAV2 into a power outlet then connect it to
your modem router’s Ethernet port using an Ethernet cable.
2.
In ROOM B plug in your HomePlugAV2 into a power outlet then connect it to
your computer’s Ethernet Port using an Ethernet cable. Your HomePlugAV2 is
now ready to use.