User Manual
Page 20 of 40
Joining an Existing Secured HomePlugAV2 Network
To enable a new device to join an existing network, Simple Connect will copy the
Private Network Name of the existing network to the new HomePlugAV2. You only
have to pair the new HomePlugAV2 device to any of the devices within the existing
HomePlugAV2 Network by pressing the Simple connect. If you pressed Simple
Connect from multiple HomePlugAV2s, only the signal from the first two devices will
be processed
.
To join an existing Secured HomePlugAV2 network using Simple Connect:
Step 1
Plug HomePlugAV2 X beside one of your existing HomePlugAV2 devices. It is
important to ensure that you can easily observe the LED behavior of the Homeplugs.
Upon connection, HomePlug X’s LEDs will blink simultaneously and then the Power
LED lights ON steadily. Ethernet LED will be ON if there is an ethernet link.
Step 2
Press Simple Connect for 10 seconds from HomePlugAV2 X. After you release the
button, Power LED and Ethernet LED (Ethernet is connected) will turn OFF and turn
ON.
Note: If the Power and Ethernet LED did not turn OFF and ON, press Simple
Connect again for 10 seconds.