The default factory configuration
is with this tube mounted on the
right side of the machine, when
viewed from the front.
Make sure that the tube is not
bent or snagged.
Make sure that the filter mounted on the end is inside the milk container.
3.3.7
Machine-refrigerator I2C bus connection
Connect the I2C serial cable connecting the machine to the refrigerator through the rear
connections. The cable is connected to the fresh milk module and it is 50 cm long, ending
in a 2x3-way male Minifit connector.
3.3.8
Connecting and configuring the refrigerator
Connect to the refrigerator
’
s power socket. Switch it on from the rear switch, next to the
220 VAC mains input hose.
Configure the refrigeration temperature setpoint. The machine
’
s programmable
thermostat is found on the front panel. Proceed as explained below.
