45
selection panel. This option requires the least preparation work: pre-drilled
panel, suction tube connected and with the correct dimensions. No additional
adaptation work is required.
o
The F16i DGT model monitors the sanitary temperature and the level in the milk
tank at all times. These options can be activated or deactivated by selecting the
F333 programming function. Analyse and assess all options and programme the
F333 refrigerator option in accordance with this (Refrigerator YES/NO
→
With
additional features / Without additional features). The F333 refers to whether
these additional options are desired or not. Use of a refrigerator is required to
maintain the milk cold chain when the container has been opened.
o
Refer to the start-up chapter for more information on adjusting the
refrigerator
’
s parameters in the Vitro M5 settings.
•
Function 333
Step 1 - REFRIGERATOR YES/NO
Used to define whether the refrigerator recommended by Azkoyen is used or not.
•
If you select YES:
The machine will start to control the corresponding parameters and states via
a series I2C connection: the sanitary temperature monitor and milk level
control will be activated.
•
If you select NO:
The machine does not control these parameters and the operation is guided
with the system
’
s built-in sensors.
Step 2 - LEFT / RIGHT / UNDER THE COUNTER
Indicate the refrigerator
’
s position. This parameter and the next must be defined,
regardless of whether this is the model recommended by AZKOYEN or not.
Step 3 - MAXIMUM LENGTH OF THE TUBE
Length of the suction tube, 3 available lengths: 100, 120 and 150 cm.
