IMPORTANT SAFETY INFORMATION
Risk of death due to electric shock
Working with the machine doors/panels open can cause electric shock.
•
Disconnect the machine from the mains.
•
Make sure that the machine cannot be switched on by accident.
•
Do not tamper with the machine or change any of its elements, following the instructions
included in the documents supplied by Azkoyen at all times for these procedures.
•
A damaged power supply cable can cause electric shock. Check it on a regular basis.
•
Never operate damaged machines or machines with damaged power supply cables.
•
If the power supply cable is damaged, it must be replaced by a cable with identical
electrical features.
•
Make sure that the power supply cable is not near hot surfaces, such as gas burners,
ovens or kitchen griddles.
•
Make sure that the power supply cable is not bent, snagged or in contact with elements
with sharp edges.
•
The machine has internal electrical parts and conductive elements that could cause fatal
injuries.
•
Repairs must only be carried out by qualified staff and using original spare parts.
Risk of death by electric shock or damage to the machine caused by water
Incidents that cause liquids to be leaked and/or spilled could occur, such as leakages in the hydraulic
circuit or liquids spilled from the waste container. If this occurs, do not handle the elements in this
section of the machine until you make sure that the machine has been unplugged from the mains.
•
First, disconnect the machine
’
s power supply plug from the mains.
•
Also disconnect the refrigeration unit from the mains.
•
Close the water supply tap.
•
Inspect the inside of the machine.
•
Before connecting it again, make sure that the incident has been resolved and dry all affected
parts and surfaces.
Never tamper with the elements inside the machine while it is connected to the mains and if there
are water or liquid waste remains.
