Functions:
C3
–
Air inlet
•
Air inlet. Need to froth milk Opens or closes the milk inlet.
C6
–
Milk inlet
•
Milk inlet. Controls the supply of milk from the refrigerator.
C10
–
Hot water inlet
•
Controls the hot water for cleaning processes, supplied by the 700cc boiler.
C12
–
Waste outlet connected to the drain
•
Used to drain the milk circuit and send its contents to the waste tray. It is
activated during the cleaning cycles and is controlled by the module
’
s PCB,
being activated/deactivated according to the stages of these cycles.
C13
–
Milk delivery to service
•
Milk outlet used to supply milk at the service conditions to the cup.
C4
–
Heater resistor
•
High-performance heating element used to heat the natural milk
instantaneously, according to the recipe
’
s specifications.
•
It features a 50k NTC (negative resistive sensor) to measure the fluid
’
s
temperature and make the control complete the service, as established in the
recipe
’
s specifications.
•
Nominal voltage: 230 VAC
•
Nominal power: 2,300 W
NTC sensor connector
