1ª 10155 ES 9 - 2009
35
1.
Cable serial port PC to serial port of the CPU
2.
Loom RS232PC
3.
Control board
with the
flash board
connected
Procedure for updating:
1
st
Ensure that the machine is switched off.
2
nd
Connect the PC with the communication cable ref. 43210820-2.
Loom RS232
to the
control board
in the connector UART1.
3
rd
Start the programme
LOADER
installed in the PC.
4
th
Select the file with extension
.S19
that is to be used.
5
th
Switch on the machine.
The updating of the programme will start automatically.
The time for the update is approx. of 1 minute
15.5.2 Updating of the
flash board
from a PC
The following is needed:
¾
PC with Windows 95 or above. The connection is made with the serial port, so the PC
must have one.
¾
A machine or the
Rack
of PCBs with the power supply.
¾
Programme:
LOADER
version 2.5 installed on the PC.
¾
Files with the programmes, extension
.S19
installed in the PC.
¾
Connection cable between the serial port of the PC and the
control board
of the
machine to the connector UAR1.
Summary of Contents for STEP 41
Page 28: ...1 10155 ES 9 2009 28 Below are the technical characteristics...
Page 29: ...1 10155 ES 9 2009 29...
Page 57: ...1 10155 ES 9 2009 57...
Page 58: ......
